APPENDIX
Code
(Hexa)
Remote control
Code
(Hexa)
Remote control
0F
TV
0B
INPUT
08
POWER
0E
TIMER
10-19
Number Key 0-9
4C
- (Dash)
1A
ADJUST
09
MUTE
02
VOL +
03
VOL -
00
CH +
01
CH -
1E
FAV
39
CC
40
D
D
41
E
E
07
F
F
06
G
G
44
ENTER
43
MENU
52
SOUND
4D
PICTURE
5B
EXIT
0A
SAP
CB
BACK
2
23
3.. C
Chhaannnneell AAdddd//D
Deell ((C
Coom
mm
maanndd:: m
m bb))
To add and delete the channels.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete
Data 1: Channel Add
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
2
24
4.. KKeeyy ((C
Coom
mm
maanndd:: m
m cc))
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
2
25
5.. BBaacckk LLiigghhtt ((C
Coom
mm
maanndd:: m
m gg))
To adjust screen back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping 1’.
G
G
p.
5.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
2
26
6.. C
Chhaannnneell TTuunniinngg ((C
Coom
mm
maanndd:: m
m aa))
To tune channel to following physical/major/minor number.
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.
Data 0: Physical Channel Number
NTSC air: 02
~
45, NTSC cable: 01, 0E
~
7D
ATSC air: 01
~
45, ATSC cable: 01
~
87
Data1 & 2: Major Channel Number
Data1: High byte Data2: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data3 & 4: Minor Channel Number
Not needed for NTSC.
76
