LG 17HK700G-W, Owner'S Manual

Page: 70 / 82

44
ENGLISH
1
Select the [Firmware Update] tab.
2
Check the current firmware version.
• The current firmware version of the detector is indicated, and the version appears when a PC is
connected to the detector.
3
Select the firmware file to update.
• Click [Open] to launch a file explorer. Select the file to update to perform a check to validate the selected
file.
• If it is a correct firmware file, its name will be shown in the [Firmware File].
• If an incorrect file is selected, the following pop-up appears.
<A pop-up when the file loading fails>
4
Update the file.
• Select the file and click the [Update] button to start updating the firmware.
• The progress will be indicated in the [Firmware Update].
<A pop-up during file updates>
• Check the result.
- The following pop-up appears when the update is completed.
<A pop-up when the file update is completed successfully>
<A pop-up when the file update fails>
5
[Factory Reset]
• Clicking the button will reset all the DXD settings.
CAUTION
• Do not remove the power cable until the update is completed. If the detector is turned off while the
update is in progress, it may not work properly.
• If firmware update is failed, Power/Link/Data LED will blink.