LG 15LC1RB-MG, Service Manual

Page: 15 / 39

- 15 -
4. After Erase Flash, Push Write Flash. Then select hex file after push Browse. Check file loading.
Push Send and wait for writing flash. (Take turns (5)~(7) )
5. Push Verify Flash and Send.(Take turns (8)~(9).) Finally, Turn off and on Main AC Power and wait for ending LED blinking.
SEDNA ISP Mode.
Push IN-START => IN-STOP => TILT => TILT at Service remocon in order then ST-BY(Red) will be blinking.
*If SET-ON LED(Green) blinks, please push TILT key once.
SEDNA Download
1. After LED checking, execute "ISP_Tool" program.
2. Push Identity and check connection message.
Check all OK!
filename.hex