LG 105UC9V, Quick Setup Manual

Page: 6 / 48

ENG
ENGLISH
6
Updating the TV Firmware
* If the TV is turned on for the first time after software update, initialization of the TV may take up to one
minute.
(Home) → (Settings) → General → About This TV → CHECK FOR UPDATES
After checking the version of the software, update it.
If you check the " Allow Automatic Updates ", you can update the software automatically.

Quick
Picture
Sound
Network
General
Safety
Accessibility
GENERAL
Language
Location
Time & Date
Timers
Motion Recognition
Launch Account Management
Standby Light
∨
On
Home/Store Mode
Eco Mode
SIMPLINK
Reset to Initial Settings
About This TV
Quick
Picture
Sound
Network
General
Safety
Accessibility
ABOUT THIS TV
Software Version
xx.xx.xx ∧
CHECK FOR UPDATES
Allow Automatic Updates
Model WEBOSx
Serial Number xxxxxxxx
Device Name LG Smart TV
webOS Version x.x.x-xxxx
User Agreements
Open Source Software Notice
Set ID : 1
1 99
∨
Wi-Fi Direct Setting
(Home) → (Settings) → Network → Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct.
With SmartShare , you can share files or screens of devices connected to Wi-Fi Direct .
1 If Wi-Fi Direct is set to ON , a list of available devices appears.
Quick
Picture
Sound
Network
General
Safety
Accessibility
Wi-Fi Direct
REFRESH LIST ON
WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
2 When you are prompted to request connection, select Yes . Wi-Fi Direct is now connected to your
TV.
* If you are not using Wi-Fi Direct to minimize the interference between Wi-Fi devices, it is
recommended to set Wi-Fi Direct to Off . You can only use devices that support Wi-Fi Direct.