DLP Personal Projector
1
INTRODUCTION
Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. PLEASE READ THIS USER’S GUIDE BEFORE YOU OPER-
ATE YOUR PROJECTOR. SAVE THIS USER’S GUIDE FOR FUTURE REF-
ERENCE .
Safety Instructions
1.
Read this user’s guide before you operate your projector and save it for
future reference.
2.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement. Do not operate lamps beyond the rated lamp life. Excessive
operation of lamps beyond the rated life could cause them to explode on
rare occasions.
3.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
4.
To reduce the risk of electric shock, do not disassemble this appliance.
Take it to a qualified technician when service or repair is required. Incorrect
reassembly can cause electric shock when the appliance is subsequently
used.
5.
Do not place this product on an unstable cart, stand, or table. The product
may fall, sustaining serious damage.
6.
Do not touch the top cover when the projector is under operation.
7.
The projector must be packaged into a carry bag while moving to another
place for operation.
