background image

3

 

Do not use high voltage electrical equipment near the TV (e.g., a bug 
zapper). This may result in product malfunction.

 

Do not attempt to modify this product in any way without written 
authorization from LG Electronics. Accidental fire or electric shock 
can occur. Contact your local customer service for service or repair. 
Unauthorized modification could void the user’s authority to operate 
this product.

 

Use only an authorized attachments / accessories approved by LG 
Electronics. Otherwise, this may result in fire, electric shock, malfunction, 
or product damage.

 

Never disassemble the AC adapter or power cord. This may result in fire 
or electric shock.

 

Handle the adapter carefully to avoid dropping or striking it. An impact 
could damage the adapter.

 

To reduce the risk of fire or electrical shock, do not touch the TV with wet 
hands. If the power cord prongs are wet or covered with dust, dry the 
power plug completely or wipe dust off.

 

Batteries

 

-

Store the accessories (battery, etc.) in a safe location out of the reach 
of children.

 

-

Do not short circuit, disassemble, or allow the batteries to overheat. 
Do not dispose of batteries in a fire. Batteries should not be exposed 
to excessive heat.

 

-

Caution : Risk of fire or explosion if the battery is replaced by an 
incorrect type.

 

Moving

 

-

When moving, make sure the product is turned off, unplugged, and 
all cables have been removed. It may take 4 or more people to carry 
larger TVs. Do not press or put stress on the front panel of the TV. 
Otherwise, this may result in product damage, fire hazard or injury.

 

Keep the packing anti-moisture material or vinyl packing out of the reach 
of children.

 

Do not allow an impact shock, any objects to fall into the product, and do 
not drop anything onto the screen.

 

Do not press strongly upon the panel with a hand or a sharp object such 
as a nail, pencil, or pen, or make a scratch on it. It may cause damage 
to screen.

 

Cleaning

 

-

When cleaning, unplug the power cord and wipe gently with a soft/
dry cloth. Do not spray water or other liquids directly on the TV. Do 
not clean your TV with chemicals including glass cleaner, any type of 
air freshener, insecticide, lubricants, wax (car, industrial), abrasive, 
thinner, benzene, alcohol etc., which can damage the product and/
or its panel. Otherwise, this may result in electric shock or product 
damage.

 

Protect the power cord from physical or mechanical abuse, such as being 
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular 
attention to plugs, wall outlets, and the point where the cord exits the 
device.

 

Do not move the TV whilst the Power cord is plugged in.

 

Do not use a damaged or loosely fitting power cord.

 

Be sure to grasp the plug when unplugging the power cord. Do not pull 
on the power cord to unplug the TV.

 

Do not connect too many devices to the same AC power outlet as this 
could result in fire or electric shock.

 

Disconnecting the Device from the Main Power

 

-

The power plug is the disconnecting device. In case of an emergency, 
the power plug must remain readily accessible.

 

Do not let your children climb or cling onto the TV. Otherwise, the TV may 
fall over, which may cause serious injury.

 

Outdoor Antenna Grounding

 (Can differ by country):

 

-

If an outdoor antenna is installed, follow the precautions below. 
An outdoor antenna system should not be located in the vicinity of 
overhead power lines or other electric light or power circuits, or where 
it can come in contact with such power lines or circuits as death or 
serious injury can occur.

 

Never touch this apparatus or antenna during a lightning storm. You may 
be electrocuted.

 

Make sure the power cord is connected securely to the TV and wall socket 
if not secured damage to the Plug and socket may occur and in extreme 
cases a fire may break out.

 

Do not insert metallic or inflammable objects into the product. If a 
foreign object is dropped into the product, unplug the power cord and 
contact the customer service.

 

Do not touch the end of the power cord while it is plugged in. You may 
be electrocuted.

 

If any of the following occur, unplug the product immediately 

and contact your local customer service.

 

-

The product has been damaged.

 

-

If water or another substance enters the product (like an AC adapter, 
power cord, or TV).

 

-

If you smell smoke or other odors coming from the TV.

 

-

When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is 
connected to the unit if not unplugged in.

Summary of Contents for OLED88Z29LA.AEK













Reviews: