24
OPERATION
4
Hold the top of the auto-lift device with both
hands and remove it from the bottom drawer.
WARNING
• The auto-lift device is heavy, so remove it with
both hands.
5
Insert the fingertips of both hands under the
cover at the center and pull the cover forward
gently.
CAUTION
• Pull the cover gently to avoid damaging it.
6
Fold the back of the cover down and push the
folded cover back slightly.
7
Insert the supplied hole cover into the groove
at the bottom of the drawer.
Assembling the Auto-lift Device
1
Remove the hole cover from the bottom of
the drawer.
2
Raise the back section of the folded cover and
rest it on the guide a at the rear of the drawer.
3
Hold the middle of the cover and lift it slightly
into the groove.
4
Make sure the hinges on the auto-lift device
are aligned with the slots in the drawer.
Summary of Contents for InstaView URETC1408N
Page 47: ...47 Memo ...
