LG SIGNATURE FH8G5XDNK3, Owner'S Manual

Page: 17 / 48

17
EN
Installing the Drain Hose
•
The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow.
Band clamp
2
With the hose leading up from the elbow,
insert the elbow onto the drain outlet on the
back of Mini Washer.
3
Adjust the band clamp with pliers to keep the
hose securely in place and prevent leaking.
Band clamp
Using the Drain Hose Connector
1
Connect the drain hose of Main Washer and
Mini Washer to the drain connector.
2
Insert the included band clamps on to the
ends of the two drain hoses.
3
Push the drain hoses firmly onto the drain
connector.
Drain hose
connector
CAUTION
•
Adjust the band clamps to prevent the hoses
from coming loose or leaking. Failure to do
so could result in flooding. Use of the drain
connector helps avoid siphoning, odors, or
improper draining.
•
Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
•
Depending on the installation environment, you
may have to purchase a separate drain hose
connector.