LG-Nortel LGP-450A, User Manual, Page: 3 / 16

Basic Operation
Turning Your Phone On and Off
. Hold down the
END/PWR
Dial/Flash
[END/PWR] key until the phone switches on.
. To switch the phone off, hold down the [END/PWR] key until the power-off image displays.
Making a Call
. Pick up the handset or press
END/PWR
Dial/Flash
[Speaker Phone] key.
. Listen for dial tone and enter the phone number.
3. Wait for the Auto Time-out or press [Dial/Flash] key.
4. The call is connected and you may start conversation.
5. To disconnect the call, replace the handset or press
END/PWR Dial/Flash
[Speaker Phone] key.
Answering a Call
When the bell rings in idle state, you can receive a call as follows:
. Pick up the handset or press the
END/PWR Dial/Flash
[Speaker Phone] key.
. Start a conversation. To disconnect the call, replace the handset or press the [Speaker
Phone] key.
Note After the call ends, the phone will go back to standby mode.
Making an International Call
. Pick up the handset or press
END/PWR Dial/Flash
[Speaker Phone] key.
. Listen for dial tone.
3. Press and hold the
END/PWR Dial/Flash
key for the international prefix. The '+' character automatically selects
the international access code.
4. Enter the country code, area code, and the phone number.
5. The call is connected and you may start conversation.
6. To disconnect the call, replace the handset or press [Speaker Phone] key.
Redialing Last Number
. Pick up the handset or press [Speaker Phone] key.
. Listen for dial tone.
3. Press [Dial/Flash] key.
4. The call is connected and you may start conversation.
5. To disconnect the call, replace the handset or press [Speaker Phone] key.
3-way Call Conferencing
END/PWR Dial/Flash
END/PWR Dial/Flash
END/PWR Dial/Flash
END/PWR
Dial/Flash
END/PWR Dial/Flash
END/PWR Dial/Flash
END/PWR Dial/Flash