User Manual
PAGE :
REG. DATE : 2012.07.25
MODEL NAME :
TWFM-B006D
REV. DATE : 2012.07.25
REV.NO : 1.0
©2012 LGIT. All rights reserved.
5 / 8
The module is controlled by wl command. It is intended for those evaluating
and/or testing Broadcom’s IC, describes a subset of the commands available in wl,
the Broadcom ® WLAN client utility.
The syntax is as follows:
wl <adapter> [-h] [-d|u|x] <command> [arguments]
where
-h this message and command descriptions
-d output format signed integer
-u output format unsigned integer
-x output format hex decimal
The [h,u] option is only to print help.
Other syntax specifics are as follows:
• Entries within square brackets, such as [arguments], are optional.
In the above example,
switches within brackets, such as –h, are typed as shown. The |symbol should not be
typed, it represents the word or.
• Entries within angle brackets, such as <adapter>, are required and indicate that
a value must be inserted in place of the item contained within the angle brackets.
• Entries shown outside of either square or angle brackets are to be typed as shown.
• CMDS
Syntax:
wl cmds
Purpose:
Generates a list of available commands.
Parameters:None
Returns:
All commands available to the attached 43XX chip.
• VER
Syntax:
wl ver
Purpose:
Generates a list of available commands.
Parameters:None
Returns:
All commands available to the attached 43XX chip.
•
Please refer to ‘80211-TI201-R’ technical document of Broadcom to other commands.
6. Software Programming
6-1. Command syntax
6-2. Command List and Version
