LG Innotek RNDF-BP01A, Owner'S Manual, Page: 27 / 32

27
Oper
ating
2
Operating
Intelligent Settings
Schedule
Select [Remote Setting] > [Intelligent] > [Schedule] to enter the setting page as shown in the figure below.
One cell in the table is 30 minutes. In the scheduled time, recording will be stored into the SD card when an
event of detection setting (PID, LCD, SOD, FD or CC) is occurred.
NOTE
y
The [Record] and [PreRecord] option in [Remote Setting] > [Record] > [Rec Parameters] should be enabled
for schedule recording.
y
The [Enable Record] option on each detection (PID, LCD, SOD, FD or CC) setting should be enabled. Refer to
page 28 for more information.
Analysis
You can make statistical report of cross-counting(CC) detection occurrence on this page.
Select [Remote Setting] > [Intelligent] > [Analysis] to enter the setting page as shown in the figure below.
Item Description
Report Type
Set ta report type option to [Daily report], [Weekly report], [Monthly report] or
[Annual report].
Alarm Type This option is not changeable. The option value is always [Cross Counting-Object].
Statistical Type
Select a statistical type.
Number of in : Analysis for movement of cross-counting direction.
Number of out : Analysis for movement of reverse direction.
Begin Time Choose the start date of the statical analysis period.
List/Histogram
/Line Chart
Select a form of result.