Full HD Digital Recorder System
6
Full HD Digital Recorder System
2
Full HD Digital Recorder System
3
Full HD Digital Recorder System
4
Full HD Digital Recorder System
5
Full HD Digital Recorder System
7
Full HD Digital Recorder System
8
Full HD Digital Recorder System
Basic Functions and LED Operation
※ The LCD screen automatically turns off in the Parking Recording mode.
※ Select the flip horizontal button of the rear camera without turning on the power.
High Temperature Prevention Function
When the temperature inside the car rises, the High Temperature Prevention function is
activated in order to prevent malfunctions and protect the product.
If the High Temperature Prevention function shuts down the system, rebooting is required to
restart the product.
Security LED status
Screen Configuration and Screen Switch
LCD display
Screen Switch
Main menu used to play videos or edit settings.
Displays GPS connection. (Activated when GPS is connected)
Displays the date and time of the product.
Displays the vehicle speed. (Activated when GPS is connected)
Displays the supplied voltage.
Menu
GPS
Time/Date
Vehicle speed
Voltage
Description
Function
NO
①
②
③
④
⑤
Safety Precautions
Warning
Caution
Do not use any chemical or detergent to clean the product.
If any liquid or foreign substance gets into the product,
it may result in electric shock, fire, or short circuit. In this case,
turn off the power, remove the power cable, and contact an
authorized service center for inspection.
Do not expose the product to rainwater or use it near water or
in a humid place.
Do not allow metal or foreign substances to get into the
product. They may cause electric shock, fire, and short circuit,
which may result in product damage or failure.
Do not disassemble, repair or modify the product at your own
discretion. Please contact an authorized service center for product
repairs. Arbitrary disassembly, repair, or modification may cause
product damage and failure. You are solely responsible for any
defects or problems arising from such damage and failure.
Do not leave the product in direct sunlight or expose it to
high heat. In particular, do not use or store the product inside
the car in the hot summer.
The recommended operating temperature of the product is
from -20°C to +70°C. Excessive heat in the summer or
excessive cold in the winter may cause product failure.
Ensure that the product operates within the recommended
temperature range.
Use only the authentic products, accessories, and parts
provided by LG Innotek.
1/2.8” 2.0MP CMOS Sensor
Front (main body)
Rear
Angle of view
Front/Rear(2CH)
Video/Audio codec
Normal recording
Event recording
(G-sensor, shock)
Parking event recording
Continuous recording
method
Audio recording
Storage device
Shock sensor
Internal playback
External playback
Operating voltage
Power consumption
112 x 68 x 31 (mm) / 110g (The main body except the mount)
Operating temperature: -20℃ ~ +70℃
Front camera: 1,920 x 1,080 (up to 30 frames)
Rear camera: 1,920 x 1,080 (up to 30 frames)
Video: H.264 / Audio: ADPCM
Records video by the unit of 80 MB (80s for 1CH, 40s for 2CH)
in driving mode.
Records video by the unit of 40 MB (40s for 1CH, 20s for 2CH)
after shock.
Records video by the unit of 40 MB (40s for 1CH, 20s for 2CH)
after shock or motion detection in parking mode.
FIFO by mode when the storage for each mode is exceeded
Audio recording supported (ON/OFF)
32 GB micro SD card (upgradeable to 64 GB)
3-axis G-sensor
3.5 inch HVGA LCD
Specified PC Viewer
DC 12 V/24 V
4W (for 2 CH)
1/2.7” 2.0MP CMOS Sensor
Front: Diagonal 136˚/Rear: Diagonal 120˚
Specifications
Item
Camera
Resolution
/Frames
Recording
Display
Dimensions
/Weight
Environment
Rated
voltage
▶ Manufacturer : LG Innotek CO., LTD/Korea
▶ Device name : Car Dashcam
▶ Model name : BBDB-FF02E
▶ Date of manufacture : Declared on the label
※ The above image may look different from the actual components.
The components of the product mentioned in this Quick Manual are subject to
change without prior notice to improve its performance.
Regular power cable
[Optional accessory]
Quick Manual
Rear camera and extension cable
The following components are provided with the product upon purchase.
Installation Procedure
Before installing the product, read the manual thoroughly, select an installation
location on the front windshield, and clean the area.
① Remove the double-sided tape from the mount and select a
location to attach the mount on.
② After attaching the mount, adjust the shooting angle by turning the
up/down and left/right adjustment screws.
(Turn on the main body to check angles and positions.)
③ After confirming the shooting angle and position,
tighten the screws to fix the mount.
Common passenger car
Possible installation locations
Installation Location
Components
Cable arranging clips
Main body
Micro SD card and adapter
[Consumables]
External GPS antenna (SGM-1533)
[Optional accessory]
Cigar jack power cable
(DA-0091)
Name and Function of Each Part
Installing the car dashcam
Displays only the front camera footage on the screen.
Displays both the front and rear camera footages on the screen.
Displays the rear camera footage on the screen.
Turns off the LCD screen.
Allows you to turn on/off the ADAS function and edit its settings.
Allows you to view recorded videos and edit various settings
Front View
Front/Rear View
Rear View
LCD OFF
ADAS
Menu
Description
Function
NO
①
②
③
④
⑤
⑥
Lens
Speaker
Manual recording button
Power button
Micro SD card slot
LCD display
LED indicator
Embedded microphone
External GPS connection
terminal
Power cable connection
terminal
Power cable connection
terminal
Mount fixing screw
Mount
Security LED
①
①
⑧
②
⑨
③
⑩
④
⑪
⑤
⑫
⑥
⑬
⑦
⑭
Operation
Condition
LED
Description
Red
Green
Booting
Booting
Flash
Flash
Each LED flashes once and immediately turns off
The red LED blinks.
The green LED blinks.
Failure to find
SD card
Blink
OFF
Failure to find
camera
OFF
Blink
Normal
mode
Normal
OFF
Flash
Records video by the unit of 80 MB in
driving mode.
Records video by the unit of 40 MB after shock.
Records video by the unit of 40 MB when the
Manual recording button is pressed.
Records video by the unit of 40 MB after shock
or motion detection in parking mode.
Event
Blink
Flash
Manual
recording
Button
Blink
Flash
Parking
recording
Event
(Motion/Shock)
The user can flip the video horizontally by
pressing the rear camera's left/right button.
Rear
camera
Flip horizontal
OFF
OFF
Mode
Security LED
Description
Normal
mode
Normal
Front white LED blinking
The left and right LEDs blink
alternatively.
Event
Front white LED OFF
-
Parking
recording
Recording
Front white LED blinking
The left and right LEDs blink
alternatively.
Event
All front white LEDs blinking
At 1-second intervals
Safety Precautions
Specifications
② ③
Outdoor
Indoor
Main body
Keep horizontal
Rear view mirror
Basic Functions
1
3
4
5
2
⑧
※ The above image may look different from
the actual components.
①
②
⑨
③
⑩
④
⑪
⑤
⑫
⑥
⑬
⑦
⑭
1
Do not store the product near any magnetic objects, including
magnets, TVs, or speakers.
Do not drop the product or expose it to excessive shock.
Do not let any children use the product. Store the product in a place
where your children or pets cannot access.
The rated voltage of the product is DC 12 V/24 V. The use of any
power cable other than the specified one may result in product
malfunction or failure.
Do not use any damaged power cable.
Do not connect or disconnect the power cable with wet hands.
When you sense any smoke or smell, turn off the engine and remove
the power cable.
Do not watch the video screen or operate it while driving. It may
result in an accident. Stop your car before operating the product.
Breaching the following precautions may result in personal injury or property damage.
Breaching the following precautions may result in serious personal injury or even death
or property damage.
To ensure your safety and prevent damages, read and understand the following safety precautions in their entirety
before installing or using the product.
ㅡ
①
②
③
④
⑤
⑥
