11
9.2 ALARM SETTING ORDER
11.1 TO SET THE PRESSURE
AL1 on → AL2 on → AL1 & AL2 on → AL1 & AL2 off.
When the alarm rings, press button to pause the alarm for 5 minutes.
The alarm icon (bell) and Zz icon k
eep flashing.
Press any button except to silence alarm for 24 hours.
Usually the pressure varies with the di
ff
erent altitude, therefore pressure
setting is allowed for the user to adjust if the user feels that the pressure is not
reasonable.
1. In Normal display, press three times switching to the pressure display
mode.
2. Press and hold over 2s to enter pressure setting mode, pressure value will
be flashing.
3. Press and release and to adjust the v
alues. Hold to adjust quic
kly.
4. Press and r
elease to confirm and exit the p
ressure setting and return to
normal display.
10 SNOOZE
11 PRESSURE SETTING
