45
De-Jamming the TDP 6s
®
There are several reasons why a TDP 6s
®
might jam such as:
• The fill depth is set too low and the pressure is set too high.
• There is a build up of powder sticking to the Tooling.
• Any powder buildup on the machine can cause tablets to eject backwards and not forwards,
creating potential for a double tablet becoming stuck in the Die’s bore.
Tools and Materials Needed
• Set of metric Allen keys with ball ends
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
WARNING:
To prevent any potential personal injury, ALWAYS unplug the TDP 6s
®
before de-jamming it.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this
process.
Run a Reverse Rotation
Note: Please refer to the Dismantling for Repair and Replacement section for additional
assistance.
1. Remove the Hopper carefully and catch any powder that is inside of it.
2. Loosen the Boot’s set screw with an Allen key.
3. Remove the Boot Bolt and Spring underneath the Boot.
Summary of Contents for TDP 6s
