42/102
17200234_002_C1/2016 - © Leybold
602494EA.DOCX
5.2.2
Measurement Unit of the Pressure
•
For pressure control, select mbar, Pa or Torr as measurement unit of the pressure.
•
For gas flow adjustment, select mbar, Pa or Torr as pressure component of the flow rate.
The «Configuration» display shows the current
settings of the operating mode, valve type, pressure
sensor, and nominal value (setpoint) with source
(I = internal, E = external). Press
to get to the «General settings» display.
The «General settings» display shows the LCD
contrast, measurement unit of the pressure, language,
automatic booting and automatic reset function. Press
2x
to edit the measurement unit setting.
to return to the «Configuration» display.
The Edit symbol is displayed in the «Measure» line.
to select the measurement unit of the
pressure:
mbar, Pascal, Torr
to save the new setting and return to the
«Configuration» display.
GEN.
VALVE SENSOR I/O GEN.
Mode : Pressure
Valve : MOVE1250STD
Sensor: CTR1000T
Nom. I: 1.33E+01 mbar
Configuration
2×
General settings
LCD-Contrast : 30
Measure : mbar
Language : english
Autoboot : on
Autoreset : off
General settings
LCD-Contrast : 30
Measure : mbar
Language : english
Autoboot : on
Autoreset : off
