manualshive.com logo in svg

LEYBOLD 1019040V00, Operating Instructions Manual

Share
Download
LEYBOLD 1019040V00 Operating Instructions Manual Download Page 24

5  Transportation

5.1  Transport and packaging

The pump passes a rigorous operating test in our factory and is packaged
to avoid transport damages.

Check the packaging on delivery for transport damages. The outer
packaging is made of a wooden pallet and cardboard or wood top.

If the pump is damaged, notify the supplier and the carrier in writing within
three days; state the item number of the pump together with the order
number and the supplier's invoice number. Retain all packing materials for
inspection. Do not use the pump if it is damaged.

Use a forklift to transport the pallet.

If possible transport the pump in its original packaging, if not available
exercise due care.

For TRIVAC D 40 L and TRIVAC D 63 L

For TRIVAC D 90 L

5.1.1  Unpack

Wear gloves and protection glasses before you unpack the pump.

1.

Cut the 3 plastic straps carefully.

300956027_002_A0 - 03/2022 - © Leybold

24

Transportation

Summary of Contents for 1019040V00

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands