Leyard Planar VM Series, User Manual

Page: 54 / 74

Operating the Display
Planar VM Series User Manual
020-1357-01A
Page | 54
18. Tiling Configuration
When using the VM Series displays in a tiled configuration, configure the displays by performing
steps in the following order:
1. Cabling: Daisy-chained wiring of video and communication connections. See section
8.8 (page 23).
2. Layout: Tiled wall size and position of each panel. See section 18.1 (page 54).
3. Source Configuration: Selection of the proper input connection on each panel. See
section 16.4 (page 32).
4. Color Balance: Adjustment of adjacent displays to ensure that they match in color. See
section 18.2 (page 55).
5. Frame Compensation: Adjustment of the tiled image to compensate for the bezel width
and gap between panels. See section 18.3 (page 57).
Note: This section discusses how to display one image across the entire wall. However, more
complex tiling setup is also possible by configuring the parameters differently for different
subsections of the wall.
18.1 Layout
Configure the following parameters in the Tiling menu (see page 48). These values will be the
same on all displays.

H Monitors: The number of displays in the horizontal direction on the tiled wall

V Monitors: The number of displays in the vertical direction on the tiled wall
Additionally, the Position parameter in the Tiling menu will need to be adjusted in each
individual panel. The number represents the location of the panel when counting left-to-right,
top-to-bottom, starting with the top left panel in the wall. Reference the example diagram below
for a 3x4 wall.
H Monitors: 3
V Monitors: 4
Position: 1
H Monitors: 3
V Monitors: 4
Position: 2
H Monitors: 3
V Monitors: 4
Position: 3
H Monitors: 3
V Monitors: 4
Position: 4
H Monitors: 3
V Monitors: 4
Position: 5
H Monitors: 3
V Monitors: 4
Position: 6
H Monitors: 3
V Monitors: 4
Position: 7
H Monitors: 3
V Monitors: 4
Position: 8
H Monitors: 3
V Monitors: 4
Position: 9
H Monitors: 3
V Monitors: 4
Position: 10
H Monitors: 3
V Monitors: 4
Position: 11
H Monitors: 3
V Monitors: 4
Position: 12