18
Wall-Mount Installation Instructions
Preparing to Install the Optional Wall Mount Arm (not included)
This LED LCD Monitor can be attached to a wall
mounting arm purchased separately.
Turn the power OFF then disconnect the cables from the
LED LCD Monitor before performing the procedure below.
1. Lay LED LCD Monitor face down on a soft surface.
2. Remove the 4 screws and pull stand away from monitor.
3. Remove the stand base.
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting
arm:
1. Place the wall mounting arm onto the back of the LED LCD
Monitor. Line up the holes of the arm with the holes in the back of
the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User's Guide that came with
the optional wall mounting arm for instructions on attaching it to the
wall.
NOTE
100 mmx100 mm VESA high hole (n=4), M4, pitch
=0.7 mm screw mounting kit not included.
