Lexus RX450h 2010 Owner'S Manual Download Page 90

Page: 90 / 690

1-4. Adjustable components (seats, mirrors, steering wheel)

re d
riv

ing

RX450h_U

Seat belts

Make sure that all occupants are wearing their seat belts before driving the
vehicle.

■

Correct use of the seat belts

●

Extend the shoulder belt so
that it comes fully over the
shoulder, but does not come
into contact with the neck or
slide off the shoulder.

●

Position the lap belt as low as
possible over the hips.

●

Adjust the position of the
seatback. Sit up straight and
well back in the seat.

●

Do not twist the seat belt.

■

Fastening and releasing the seat belt

To fasten the seat belt, push
the plate into the buckle until
a click sound is heard.
To release the seat belt, press
the release button.

Release button

Summary of Contents for RX450h 2010



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX450h 2010

Reviews:

Related manuals for RX450h 2010

Brands by name

Popular brands

Lexus RX450h 2010, Owner'S Manual

Search results

Summary of Contents for RX450h 2010

Reviews:

Related manuals for RX450h 2010

Brands by name

Popular brands