Lexus RX350 2023, Manual

Page: 84 / 604

84
2-1. Instrument cluster
been driven.

Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
 Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■
Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
Depending on the current drive mode
or settings, the displays will change as
follows. Settings can be changed on
the center display. (

P.543)

Vehicles without a head-up display
 Tachometer
Displayed when the meter display type set-
ting is set to display type 1 or display type 3.

Speedometer
Always displayed.
The display will change between a digital
speedometer and/or analog speedometer
depending on the meter display type set-
ting.

Vehicles with a head-up display
 Tachometer
Displayed when the meter display type set-
ting is set to display type 1.
F SPORT models: Also displayed when set
to display type 3.
 Speedometer
A digital speedometer is always displayed.
When the meter display type setting is set
to display type 2, an analog speedometer
will also be displayed.
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2 Brighter
■
Brightness of the meters (day mode and
night mode)
The brightness of the meters is changed
between day mode and night mode.
●
Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
Changing between the tachom-
eter/speedometer displays
Changing the instrument panel
light brightness