Lexus RX350 2023, Manual

Page: 455 / 604

455
6-3. Do-it-yourself maintenance
6
Mai
nte
na
nc
e a
nd
c
are
ute and then illuminate. Also, while the
change is being performed, “---” will be
displayed for the tire inflation pressure of
each tire on the multi-information display.
After approximately 2 minutes, the wheel
set change will complete, the tire pressure
warning light will turn off, and a completion
message will be displayed on the
multi-information display.
If changing does not complete after
approximately 4 minutes, a message indi-
cating that the change could not be com-
pleted will be displayed.
Check which wheel set is installed and per-
form the change procedure again from the
beginning.
7 If the specified tire inflation pres-
sure of the wheel set installed dif-
fers from that of the previous set, it
will be necessary to perform the
tire inflation pressure setting proce-
dure of the tire pressure warning
system. (

P.450)
If the specified tire inflation pressure is the
same, it will not be necessary to perform
the tire inflation pressure setting proce-
dure.
8 Register the position of each wheel.
(

P.449)
The recommended cold tire inflation
pressure and tire size are displayed on
the tire and loading information label.
(

P.530)
Tire valve
Tire pressure gauge
Tire inflation pressure
Checking the specified tire infla-
tion pressure
Inspection and adjustment pro-
cedure
A
B