POWER BACK DOOR NOISE – EL013-07
November 6, 2007
Page 4 of 4
6. Remove the power back door drive assembly.
A. Disconnect the connector.
B. Remove the 4 bolts and the power back door drive assembly.
7. Install the NEW power back door drive assembly.
A. Apply adhesive to the threads of the 6 bolts.
Adhesive: Three Bond 1324 (P/N 08833–00070) or equivalent
B. Install the NEW drive unit to the
vehicle body with the 4 bolts in
the order shown.
Torque: 31 N
S
m (316 kgf
S
cm,
23 ft
S
lbf)
C. Install the drive unit arm to the
door with the 2 bolts.
Torque: 31 N
S
m (316 kgf
S
cm,
23 ft
S
lbf)
D. Install the trim panel.
8. Install the roof headlining assembly in reverse order of disassembly.
9. Re-initialize any affected power systems.
Refer to the following TSIBs:
S
For 2004 model year — TSIB No. PG002-03, “
Pre-Delivery Service (PDS)
Information for RX 330”
S
For 2005 model year — TSIB No. PD010-05, “
Power System Initialization
During PDS”
S
For 2006 model year — TSIB No. PD009-06, “
Power System Initialization
During PDS”
S
For 2007 model year — TSIB No. PD007-07, “
Power System Initialization
During PDS”
10. Set radio presets and clock.
Repair
Procedure
(Continued)
1
2
3
4
