2003 RX300 from Aug. 02’ Prod. (OM48442U)
CHECKING THE ENGINE OIL LEVEL
62R042
With the engine at operating temperature and turned off,
check the oil level on the dipstick.
1. To get a true reading, the vehicle should be on a level spot.
After turning off the engine, wait a few minutes for the oil to
drain back into the bottom of the engine.
2. Pull the dipstick out, hold a rag under the end and wipe it
clean.
3. Reinsert the dipstick and push it in as far as it will go, or the
reading will not be correct.
62e002a
1
Add oil
2
O.K.
3
Too full
4. Pull the dipstick out and look at the oil level while holding a
rag under the end. If it is between the low level mark (
4
) and
the full level mark (
5
), it is O.K.
NOTICE
Be careful not to drop the engine oil on the vehicle
components.
Summary of Contents for RX300 2003
