Lexus RC F, Owner'S Manual

Page: 351 / 447

349
7
RC F̲OM̲(GE)̲1903
7-2. Steps to take in an emergency
Wh
en
tr
oubl
e ar
is
es
If a tow truck is not available in an
emergency, your vehicle may be tem-
porarily towed using cables or chains
secured to the emergency towing eye-
lets. This should only be attempted on
hard surfaced roads for at most 80 km
(50 miles) at under 30 km/h (18 mph).
A driver must be in the vehicle to steer
and operate the brakes. The vehicle’s
wheels, drive train, axles, steering and
brakes must be in good condition.
1 Take out the towing eyelet.
(

P.363, 370)
2 Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehicle
body as shown in the illustration.
3 Insert the towing eyelet into the
hole and tighten partially by hand.
4
Tighten down the towing eyelet
securely using a wheel nut wrench
or hard metal bar.
5 Securely attach cables or chains to
the towing eyelet.
Take care not to damage the vehi-
cle body.
6
Enter the vehicle being towed and
start the engine.
If the engine does not start, turn the
Emergency towing
Emergency towing procedure
RC F_OM_General_OM24838E