142
3-2. Opening, closing and locking the doors
NX200t/200_OM_Europe_OM78156E
■
If the back door opener is inoperative (vehicles with a power back door)
The back door can be unlocked from the inside.
Move the lever.
■
Back door closer (vehicles with a power back door)
In the event that the back door is left slightly open, the back door closer will automatically
close it to the fully closed position.
Whatever the state of the engine switch, the back door closer operates.
■
Operation of the power back door (vehicles with a power back door)
●
A buzzer sounds and the emergency flashers flash twice to indicate that the back door
is opening/closing.
●
When the power back door operations are OFF, the power back door does not oper-
ate but it can be opened and closed by hand.
●
When the power back door automatically opens, if an abnormality due to people or
objects is detected, operation will stop.
■
Back door reserve lock function (vehicles with a power back door)
This function is a function which reserves locking of all doors, beforehand, when the back
door is open. When the follow is done, all the doors except the back door are locked and
then back door will also be locked at the same time it is closed.
Close all doors, except the back door.
Push the wireless lock button during the automatic closing operation of the back door.
■
When reconnecting the battery (vehicles with a power back door)
To enable the power back door to operate properly, close the back door manually.
Remove the cover.
To protect the cover, place a rag between the
flathead screwdriver and the cover as shown
in the illustration.
1
2
Type A
Type B
1
2
nasicoelec.ir
