Lexus NX 200, Owner'S Manual

Page: 264 / 514

263
4
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
4-5. Using the driving support systems
Dr
ivin
g
Large adjustment: Hold the lever up or
down to change the speed, and release
when the desired speed is reached.
In the vehicle-to-vehicle distance control
mode, the set speed will be increased or
decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*1
or 1
mph (1.6 km/h)
*2
each time the lever is
operated
Large adjustment: Increases or decreases
in 5 km/h (3.1 mph)
*1
or 5 mph (8 km/h)
*2
increments for as long as the lever is held
In the constant speed control mode
(

P.265), the set speed will be increased
or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*1
or 1
mph (1.6 km/h)
*2
each time the lever is
operated
Large adjustment: The speed will continue
to change while the lever is held.
*1
: When the set speed is shown in “km/h”
*2
: When the set speed is shown in “MPH”
Pressing the switch changes the vehi-
cle-to-vehicle distance as follows:
1 Long
2 Medium
3 Short
The vehicle-to-vehicle distance is set auto-
matically to long mode when the engine
switch is turned to IGNITION ON mode.
If a vehicle is running ahead of you, the pre-
ceding vehicle mark
will also be dis-
played.
Changing the vehicle-to-vehicle
distance (vehicle-to-vehicle dis-
tance control mode)
A