56
LC500_LC500h_QG_OM11444U_(U)
1
Turn the engine switch <power switch> to IGNITION ON mode <ON mode>.
2
Press
or
of the meter control switches and select
.
3
Press
or
of the meter control switches and select “Vehicle Settings”, then
press “OK”.
4
Press
or
of the meter control switches and select “TPWS SET”, then press
“OK”.
5
Press
or
of the meter control switches and select “Set tire pressure”. Then
press and hold “OK” until the tire pressure warning light starts blinking.
A message is displayed on the multi-infor-
mation display. Also, “--” is displayed for
inflation pressure of each tire on the multi-
information display while the tire pressure
warning system determines the position.
6
Drive the vehicle at approximately 25 mph (40 km/h) or more for approximately 10 to
30 minutes.
When initialization is complete, the inflation pressure of each tire will be displayed on
the multi-information display.
Initializing the tire pressure warning system
Summary of Contents for LC500 2017
Page 4: ...4 LC500_LC500h_QG_OM11444U_ U...
Page 102: ...102 LC500_LC500h_QG_OM11444U_ U...
