Lexus IS 300 2019, Owner'S Manual

Page: 512 / 715

510
6-5. Using the other interior features
IS350_300_GE
■
Programming HomeLink
®
Press and release the HomeLink
®
button you want to program and check
that the HomeLink
®
indicator light flashes (orange).
Perform within 60 seconds of , or the indicator light will stop flashing
and programming will not be able to be completed.
Point the remote control transmit-
ter for the device at the rear view
mirror, 25 to 75 mm (1 to 3 in.)
from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light
in view while programming.

Garage door type A
Press and hold the handheld
transmitter button until the
HomeLink
®
indicator light
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.

Garage door type B (Programming an entry gate/Programming the
HomeLink
®
)
Press and release the remote control transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
®
indicator light changes from slowly
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
Test the HomeLink
®
operation by pressing the newly programmed button
and observing the indicator light:
●
Device with fixed code: If the indicator light is solid/continuous, pro-
gramming has been completed and your garage door or other device
should operate when the HomeLink
®
button is pressed and released.
1
3 1
2
3
3
4
IS350_IS300_OM_General_OM53F31E