manualshive.com logo in svg

Lexus GX470 2006, Service Manual

The Lexus GX470 2006 Service Manual is a comprehensive guide for maintaining and repairing your vehicle. Download this manual for free from manualshive.com, and get access to detailed instructions, diagrams, and troubleshooting tips, ensuring the smooth and efficient operation of your Lexus GX470 2006.

Share
Download
background image

DRIVING TIPS

414

5. Wait for about 20 seconds until the rear vehicle height is
lowered by the automatic leveling function.

6. Make sure the hitch is disconnected.  If not, raise the hitch
higher and repeat steps 2 through 5.

7. Move the vehicle forward in the “LO” (low) mode where the
hitch does not touch anything in the “N” (normal) mode.

8. Put the rear height control air suspension in the “N” (normal)
mode.

Pre

−

towing safety check

D

Check that your vehicle remains level when a loaded or
unloaded trailer is hitched.  Do not drive if the vehicle has an
abnormal nose

−

up or nose

−

down condition, and check for

improper tongue load, overload, worn suspension or other
possible causes.

D

Make sure the trailer cargo is securely loaded so that it
cannot shift.

D

Check that your rear view mirrors conform to any federal,
state/provincial or local regulations.  If they do not, install
required rear view mirrors appropriate for towing purposes.

Trailer towing tips

When towing a trailer, your vehicle will handle differently
than when not towing.  The three main causes of
vehicle

−

trailer accidents are driver error, excessive speed

and improper trailer loading.  Keep these in mind when
towing:

D

Before starting out, check the operation of the lights and all
vehicle

−

trailer connections.  After driving a short distance,

stop and recheck the lights and connections.  Practice
turning, stopping and backing with a trailer in an area away
from traffic until you learn the feel.

D

Backing with a trailer is difficult and requires practice.  Grip
the bottom of the steering wheel and move your hand to the
left to move the trailer to the left.  Move your hand to the right
to move the trailer to the right.  (This procedure is generally
opposite to that when backing without a trailer.)  Also, just
turn the steering wheel a little at a time, avoiding sharp or
prolonged turning.  Have someone guide you when backing
to reduce the risk of an accident.

D

Because stopping distance may be increased,
vehicle

−

to

−

vehicle distance should be increased when

towing a trailer.  For each 16 km/h (10 mph) of speed, allow
at least one vehicle and trailer length between you and the
vehicle ahead.  Avoid sudden braking as you may skid,
resulting in jackknifing and loss of control.  This is especially
true on wet or slippery surfaces.

Summary of Contents for GX470 2006





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GX470 2006

AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
VDO VIEWLINE 52 MM - MOUNTING 11-09 Installation Instructions preview
VIEWLINE 52 MM - MOUNTING 11-09
Brand: VDO Pages: 4
RAM Truck Diesel Supplement 2012 Owner'S Manual preview
Truck Diesel Supplement 2012
Brand: RAM Pages: 174
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
Mynew Portable Car Umbrella User Manual preview
Portable Car Umbrella
Brand: Mynew Pages: 5
Mobridge DA-G2 MOST150 Manual preview
DA-G2 MOST150
Brand: Mobridge Pages: 20
Xforce PR-104 User Manual preview
PR-104
Brand: Xforce Pages: 11
Westfalia 300025300113 Installation Instructions Manual preview
300025300113
Brand: Westfalia Pages: 97
NavLinkz RL1-MMI3G Manual preview
RL1-MMI3G
Brand: NavLinkz Pages: 17
Honda 2004 Civic Si Owner'S Manual preview
2004 Civic Si
Brand: Honda Pages: 219
VanEssa mobilcamping 00001668 Installation Manual preview
00001668
Brand: VanEssa mobilcamping Pages: 12
LAS 10329 Operating Instructions Manual preview
10329
Brand: LAS Pages: 10
Chevrolet 2003 Malibu Owner'S Manual preview
2003 Malibu
Brand: Chevrolet Pages: 354

Brands by name

Popular brands

Load more brands