Lexus GS450h2016, Service Manual

Page: 106 / 544

106
GS450h_OM_OM30E99U_(U)
2. Instrument cluster
Press the “DISP” button to switch between on and off.
On and off will be switched between each time the button is pressed.
If the button is left alone without being operated for a short time, setting will be fin-
ished automatically.
■
Head-up display
●
The head-up display may seem dark and hard to see when viewed through sunglasses,
especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
●
When the head-up display is turned off, it will remain off even if the power switch is
turned to ON mode after the power switch has been turned off.
●
The startup image will be displayed on the head-up display after the power switch has
been turned to ON mode while the head-up display switch is set to on.
■
When the 12-volt battery is disconnected
The customize settings of the head-up display will be reset.
■
Head-up display automatic position adjustment
If the display position is recorded into memory, the head-up display will be automatically
adjusted to the desired position. (

P. 143)
WARNING
■
Before using the head-up display
Check that the position and brightness of the head-up display image does not interfere
with safe driving. Incorrect adjustment of the image’s position or brightness may
obstruct the driver’s view and lead to an accident, resulting in death or serious injury.
NOTICE
■
To prevent damage to components
●
Do not touch the inside of the head-up display projector or thrust sharp edges or the
like into the projector.
Doing so could cause mechanical malfunctions.
2
●
Do not place any drinks near the head-up dis-
play projector. If the projector gets wet, elec-
trical malfunctions may result.
●
Do not place anything on or put stickers onto
the head-up display projector.
Doing so could interrupt head-up display
indications.