Lexus GS350 NAVI Owner'S Manual Download Page 212

Page: 212 / 844

212

GS350_OM_OM30D41U_(U)

4-5. Using the driving support systems

To change the set speed, operate the lever until the desired set speed is
obtained.

Increases the speed
Decreases the speed

Fine adjustment: Momentarily move
the lever in the desired direction.

Large adjustment: Hold the lever in
the desired direction.

The set speed will be increased or decreased as follows:

Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is oper-
ated.

Large adjustment: The set speed can be increased or decreased continually until
the lever is released.

Pulling the lever toward you can-
cels the constant speed control.

The speed setting is also canceled
when the brakes are applied.

Pushing the lever up resumes the
constant speed control.

Resuming is available when the vehi-
cle speed is more than approximately
25 mph (40 km/h).

Adjusting the set speed

Canceling and resuming the constant speed control

Summary of Contents for GS350 NAVI













































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS350 NAVI

Reviews:

Related manuals for GS350 NAVI

Brands by name

Popular brands

Lexus GS350 NAVI, Owner'S Manual

Search results

Summary of Contents for GS350 NAVI

Reviews:

Related manuals for GS350 NAVI

Brands by name

Popular brands