manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 76

SWITCHES

55

HEADLIGHT CLEANER SWITCH

The headlight cleaner switch is located in the switch box.

G12010

Push the button to use the switch box.  To spray fluid on
the headlights, push the switch with the headlights on.

The engine switch must be selected in “IG

−

ON” mode.

The warning message “LOW WASHER FLUID” is displayed in
the multi

−

information display when the fluid level in the tank

becomes very low.  For information on adding washer fluid, see
“Adding washer fluid” on page 579.

After operation, be sure to close the switch box to its original
position.

CAUTION

To reduce the chance of injury in case of an accident or
a sudden stop, keep the switch box closed when not in
use while driving.

NOTICE

Do not turn the headlight cleaner on with the washer
fluid tank empty.  It may cause the cleaner motor to
overheat.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands