manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 600

ELECTRICAL COMPONENTS

579

ADDING WASHER FLUID

If the washer tank becomes nearly empty, add washer
fluid.

You may use plain water as washer fluid.  However, in cold
areas where temperatures range below the freezing point, use
washer fluid containing antifreeze.  This product is available at
your Lexus dealer and most auto parts stores.  Follow the
manufacturer’s directions for how much to mix with water.

NOTICE

Do not use engine antifreeze or any other substitute
because it may damage your vehicle’s paint.

CHECKING THE HEADLIGHT AIM

G64020

 1 Beam angle gauge 

(horizontal movement for high beam)

 2 Beam angle gauge 

(vertical movement for high beam)

 3 Beam angle gauge 

(vertical movement for low beam)

 4 Beam angle gauge

(horizontal movement for low beam)

Before checking the headlight aim:

1. Be sure that the body around the headlight is not deformed.

2. Park the vehicle on a level spot.

3. The driver gets into the driver’s seat and puts the vehicle in
a state readying for a driving (with a full tank).

4. Bounce the vehicle several times.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands