Lexus 2016 GS 200t, Owner'S Manual

Page: 366 / 624

366
GS350_200t_GS F_OM_OM30E86U_(U)
5-5. Using the other interior features
■
Programming HomeLink
®
Press and release the HomeLink
®
button you want to program and check
that the HomeLink
®
indicator light flashes (orange).
Perform within 60 seconds of , or the indicator light will stop flashing and
programming will not be able to be completed.
Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light
in view while programming.

For U.S.A. owners
Press and hold the handheld
transmitter button until the
HomeLink
®
indicator light
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.

Programming an entry gate (for U.S.A. owners)/Programming a device in
the Canadian market
Press and release the remote control transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
®
indicator light changes from slowly
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
Test the HomeLink
®
operation by pressing the newly programmed button
and observing the indicator light:
●
Device with fixed code: If the indicator light is solid/continuous, pro-
gramming has been completed and your garage door or other device
should operate when the HomeLink
®
button is pressed and released.
●
Device with rolling code: If the indicator light flashes rapidly, your
garage door opener motor (or other device) is equipped with a rolling
code. Complete the programming process by firmly pressing and hold-
ing the programmed HomeLink
®
button for 2 seconds and then release
the button.
1
3 1
2
3
3
4