Lexus 2013 IS250, Owner'S Manual

Page: 188 / 600

186
4-1. Before driving
IS250_EE(OM53B11E)

Tire information

Increase the tire inflation pressure to 20.0 kPa (0.2 kgf/cm
2
or bar, 3 psi) greater
than the recommended value when towing. (

P. 544)

Increase the air pressure of the trailer tires in accordance with the total trailer
weight and according to the values recommended by the manufacturer of your
trailer.

Break-in schedule
Lexus recommends that vehicles fitted with new power train components should
not be used for towing trailers for the first 800 km (500 miles).

Safety checks before towing

Check that the maximum load limit for the towing hitch/bracket hitch ball is not
exceeded. Bear in mind that the coupling weight of the trailer will add to the
load exerted on the vehicle. Also make sure that you will not be towing a load
that exceeds the maximum permissible axle capacity.

Ensure that the trailer load is secure.

Supplementary outside rear view mirrors should be added to the vehicle if the
traffic behind cannot be clearly seen with standard mirrors. Adjust the extend-
ing arms of these mirrors on both sides of the vehicle so that they always pro-
vide maximum visibility of the road behind.

Maintenance

Maintenance must be performed more frequently when using the vehicle for
towing due to the greater weight burden placed on the vehicle compared to nor-
mal driving.

Retighten all bolts securing the hitching ball and bracket after towing for
approximately 1000 km (600 miles).
NOTICE

When the rear bumper strengthening material is aluminum
Ensure the steel bracket part does not come directly in contact with that area.
When steel and aluminum come into contact, there is a reaction similar to cor-
rosion, which will weaken the section concerned and may result in damage.
Apply a rust inhibitor to parts that will come in contact when attaching a steel
bracket.