manualshive.com logo in svg

Lexus 2012 RX450h, Owner'S Manual

Share
Download
Lexus 2012 RX450h Owner'S Manual Download Page 104

103

1-4. Adjustable components (seats, mirrors, steering wheel)

1

Be

fo

re d
riv

ing

RX450h_U

CAUTION

■

Seat belt pretensioners

●

Do not place anything, such as a cushion, on the front passenger's seat. Doing so
will disperse the passenger's weight, which prevents the sensor from detecting
the passenger's weight properly. As a result, the seat belt pretensioner for the
front passenger's seat may not activate in the event of a collision.

●

If the pretensioner has activated, the SRS warning light will come on. In that case,
the seat belt cannot be used again and must be replaced at your Lexus dealer.

■

Seat belt damage and wear

●

Do not damage the seat belts by allowing the belt, plate, or buckle to be jammed
in the door.

●

Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts.
Do not use a damaged seat belt until it is replaced. Damaged seat belts cannot
protect an occupant from death or serious injury.

●

Ensure that the belt and tab are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact your Lexus
dealer.

●

Replace the seat assembly, including the belts, if your vehicle has been involved in
a serious accident, even if there is no obvious damage.

●

Do not attempt to install, remove, modify, disassemble or dispose of the seat belts.
Have any necessary repairs carried out by your Lexus dealer. Inappropriate han-
dling of the pretensioner may prevent it from operating properly, resulting in
death or serious injury.

■

Using a seat belt comfort guide

Failure to observe the following precautions could reduce the effectiveness of the
seat belt in an accident, causing death or serious injury.

●

Make sure the belt is not twisted and that it lies flat. The elastic cord must be
behind the belt and the guide must be on the front.

●

To reduce the chance of injury in case of a sudden stop, sudden swerve or acci-
dent while driving, remove and store the comfort guide in its pocket when it is not
in use.

●

Always make sure the shoulder belt is positioned across the center of the shoul-
der. The belt should be kept away from the neck, and should not fall off the shoul-
der. 

Summary of Contents for 2012 RX450h



































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands