Lexus 2002 ES 300 Navigation system, Owner'S Manual

Page: 17 / 131

Destination Input
ES300_Navi_U (L/O 0208)
7
2003 ES300 Navigation from Aug. ’02 Prod. (OM33592U)
You can find your destination using various
methods. See pages 8 through 25 for the
detailed steps.
1. By Home ( switch on the “Destina-
tion” screen): You can select your own
home without entering the address each
time. In this case, it is necessary to register
your home beforehand. See page 8 for the
detailed steps.
2. By Preset Destination ( —
switches on the “Destination” screen):
You can select one of 5 preset destinations
directly. In this case, it is necessary to regis-
ter the destinations beforehand. See page
9 for the detailed steps.
3. By Address: You can input the house
number and the street address by using the
input keys. See page 10 for the detailed
steps.
4. By POI: You can select one of the many
points of interest that have been already
stored in the system’s database. There are
about 50 categories to choose from, includ-
ing restaurants, banks and automotive loca-
tions. See page 12 for the detailed steps.
5. By Marked Point: You can register your
own favorite destinations as a “Marked
Point”. The system allows you to store up
100 marked points. See page 19 for the de-
tailed steps.
6. By Previous Destination: You can se-
lect a destination from any of the last 20 pre-
viously set destinations. See page 20 for the
detailed steps.
7. By Emergency: You can select one of
the three points of emergency service points
that have been already stored in the sys-
tem’s database. See page 21 for the detailed
steps.
8. By Intersection: You can enter the
names of two intersecting streets. This is
helpful if you do not know the specific street
address of your destination but know the
general vicinity. See page 22 for the detailed
steps.
9. By Freeway Entrance/Exit: You can en-
ter the name of the freeway (interstate) en-
trance or exit. See page 23 for the detailed
steps.
10. By Previous Starting Point: You can
enter a point where the system has started
to guide last time. See page 25 for the de-
tailed steps.
11. By Map Selection: You can select a
destination simply by touching the location
on the displayed map. See page 25 for the
detailed steps.
INFORMATION
When inputting the destination, the
response to the switch may be slow.
“Points of Interest” registration is
made based on the NAVTECH
“Standard POI Inclusion List” and
infoUSA POI data.
If there is no point registered,
switches such as “Marked Point”,
“Previous Destination” or “Previous
Starting Point” are dimmed and not
available.
The route for returning may not be
the same as that for going.
The route guidance to the destina-
tion may not be the shortest route or
a route without traffic congestion.
Route guidance may not be available
if there is no road data for the speci-
fied location.