______________________________________________________
Operation and Care
AUTO OPERATION (Auto-Fill™ Models Optional on Versas Spa):
1.1 Use faucet knob to adjust optimal water temperature at “H” (Left) or “C” (Right) directory.
1.2 Pull out and tilt down faucet knob to shut off water any time during the automatic or manual
operational cycle.
Water will automatically turn-off when optimal water level is detected by 2 sensors.
Auto-Fill™ option can be simply reset to normal manual mode as a contingent system when
automatic operation becomes unavailable. Please call our Customer care for instructions.
If you notice the water stops before reaching water sensors. This might cause by the power unstable
at that moment. To continue filling, turn the Auto-Fill knob clockwise again.
Auto-Fill™ / Jet Switch
:
(
Dual-functional momentary switch located on the right side of the front panel
)
1.
To turn water on:
Turn knob clockwise and release. Water will fill up to reach the
sensor level and activate the whirlpool jets
2.
To turn water off:
Turn knob clockwise and release to turn off water. The switch can be activated
to turn on or turn off water any time during the Auto-Fill™ cycle,
NOTE:
Activate this Auto-Fill/Jet Knob:
1. When water is running, system will resume with turn off water.
2. When Whirlpool Jet is running, system will resume with turn off Jet
3. When water is full and Jet is off, system will resume with fill up water for 3sec and Jet turns on.
4. When water level is low, system will resume with fill up water prior activating whirlpool jet
Drain Switch:
(Dual Action Electro-mechanical Switch located on the left side of the front panel)
When activating the switch, it will raise the drain-stopper and power up the drain pump (if exist) at the
same time.
1.
To drain water:
Turn the drain knob clockwise. Drain pump is activated.
2.
To turn off the drain pump:
Turn the drain knob counterclockwise.
CAUTION: Reset the Drain knob to vertical position to close the drain stopper prior fill up water
Important
!
Must scrub and clean water sensors frequently to ensure that water stops right at sensor
level. If necessary, clean using sponge buffer
.
Warning
Water control knob must be used to shut off water supply to basin when spa
chair is left unattended and overnight
13
