15
_______________________________________________________
Operation and Care
Auto-Fill™ / Jet Switch:
(
Dual-functional momentary switch located on the right side of the front panel
)
1.
To turn water on:
Turn knob clockwise for 1 second and release. Water will fill up to reach the
sensor level and activate the whirlpool jets to proceed a running duration of thirty (30) minutes
automatically.
2.
To turn water off:
Turn knob clockwise for 1 second and release to turn off water. The switch
can be activated to turn on or turn off water any time during the Auto-Fill™ cycle, EXCEPT when
water is at sensor level.
3.
To turn On / Off the whirlpool jet:
Turn knob clockwise for 1 second and release. This Jet
cannot be turned on if water level is not at sensor level.
Drain Switch:
(Dual Action Electro-mechanical Switch located on the left side of the front panel)
When activating the switch, it will raise the drain-stopper and power up the drain pump (if exist) at the
same time.
3.1 To drain water: Turn the drain knob clockwise. Switch is activated
3.2 To turn off the drain pump: Turn the drain knob counterclockwise.
