Lexmark Z2300 Series, User Manual

Page: 23 / 54

b
Customize the settings as needed in the Print dialog.
1
With a document open, click File
Œ
Print .
2
From the Printer pop-up menu, choose the printer that you want to use.
3
From the print options pop-up menu, choose Quality & Media .
4
From the Paper type pop-up menu, choose a paper type.
5
From the Print Quality menu, choose a print quality other than Quick Print.
Tips on loading label sheets
•
Make sure the top of the label sheet feeds into the printer first.
•
Make sure the adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.
•
Make sure the paper guide or paper guides rest against the edges of the label sheet.
•
Use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during
printing, resulting in a paper jam.
Note: Labels require more drying time. Remove each label sheet as it exits, and then allow it to dry to avoid ink
smudging.
Printing on custom-size paper
Before beginning these instructions, load the custom-size paper in the printer. For more information, see the “Loading
Paper” chapter.
Using Windows
1
With a document open, click File
Œ
Print .
2
Click Properties , Preferences , Options , or Setup .
The Print Setup tab appears.
3
In the Paper Options section, from the “Paper size” list, select Custom Size .
The Define Custom Paper Size dialog appears.
4
Select the measurement units to use (inches or millimeters).
5
Click OK to close any printer software dialogs that are open.
6
Print the document.
Using Macintosh
1
With a document open, click File
Œ
Page Setup .
2
From the Paper size pop-up menu, choose Manage Custom Sizes .
3
Create a custom size.
a
Click + .
b
In the Page Size menu, type the Width and Height of the paper.
c
From the Printer Margins pop-up menu, choose the printer that you want to use. The margins are set by the
printer.
If you want to set the margins, choose User defined , and then type the margins in the Printer Margins area.
23