Lexmark XM9100 Series, User Manual

Page: 157 / 364

Use To
Factory Defaults
Do Not Restore
Restore Now
Restore the printer settings to the factory default settings.
Notes:
•
Do Not Restore is the factory default setting. This keeps the
user
‑
defined settings.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads stored in
flash memory or on a printer hard disk are not affected.
Export Configuration Package
Export
Export the printer configuration file to a flash drive.
Copy Settings menu
Use To
Content Type
Text
Graphics
Text/Photo
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is two
‑
sided or one
‑
sided, and then to specify
whether the copy should be two
‑
sided or one
‑
sided.
Notes:
•
1 sided to 1 sided —The original document has print on one side and the copy
will also have print on one side.
•
1 sided to 2 sided —The original document has print on one side, while the
copy will have print on both sides.
• 2 sided to 1 sided —The original document has print on both sides, while the
copy will have print on just one side.
• 2 sided to 2 sided —The original document has print on both sides, and the
copy will also have print on both sides.
Understanding the printer menus 157