Upgrading and migrating
Hardware
Available internal options
•
Flash memory
•
Font cards
•
Firmware cards
–
Forms and Bar Code
–
PRESCRIBE
–
IPDS
•
Printer hard disk
•
Internal solutions port
–
Parallel 1284
‑
B Interface Card
–
RS
‑
232C Serial Interface Card
–
Fiber Interface Card
–
N8350 802.11b/g/n Wireless Print Server Interface Card
Accessing the controller board
CAUTION—SHOCK HAZARD:
To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Using a flat-head screwdriver, open the controller board access cover.
Warning—Potential Damage:
Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
Upgrading and migrating
256
Summary of Contents for XM7355
Page 175: ...6 Insert the new ADF feed roller until it clicks into place Maintaining the printer 175...
Page 203: ...Staple jam in the staple nisher 1 Open door F Clearing jams 203...
Page 204: ...2 Remove the staple cartridge holder 3 Remove the loose staples Clearing jams 204...
Page 270: ...Upgrading and migrating 270...
