Lexmark XM3250 User Manual Download Page 153

Page: 153 / 289

Maintaining the printer

Warning—Potential Damage:

Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Adjusting the speaker volume

Adjusting the default internal speaker volume

From the control panel, navigate to:

Settings

Device

Preferences

Audio Feedback

Adjust the volume.

Notes:

•

If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.

•

The volume resets to the default value after the session is logged out or when the printer wakes from
Sleep or Hibernate mode.

Adjusting the default headphone volume

From the control panel, navigate to:

Settings

Device

Accessibility

Adjust the headphone volume.

Note:

The volume resets to the default value after the session is logged out or when the printer wakes

from Sleep or Hibernate mode.

Conﬁguring the fax speaker settings

Note:

Make sure that fax is conﬁgured. For more information, see

“Setting up the printer to fax” on page 55

From the home screen, touch

Settings

Fax

Fax Setup

Speaker Settings

Do the following:

•

Set Speaker Mode to

Always On

•

Set Speaker Volume to

High

•

Enable Ringer Volume.

Maintaining the printer

153

Summary of Contents for XM3250


































































































































































































































































































Search results

Summary of Contents for XM3250

Reviews:

Related manuals for XM3250

Brands by name

Popular brands

Lexmark XM3250, User Manual

Search results

Summary of Contents for XM3250

Reviews:

Related manuals for XM3250

Brands by name

Popular brands