Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Settings
>
Fax
>
Fax Setup
>
General Fax Settings
.
Note:
Fax Setup appears only if Fax Mode is set to Fax.
3
In the Fax Name field, type a unique name.
4
In the Fax Number field, enter the fax number that etherFAX provided.
5
From the Fax Transport menu, select
etherFAX
.
6
Apply the changes.
Setting up the fax function using fax server
Notes:
•
This feature lets you send fax messages to a fax service provider that supports e
‑
mail receiving.
•
This feature supports outgoing fax messages only. To support fax receive, make sure that you have a
device
‑
based fax, such as analog fax, etherFAX, or Fax over IP (FoIP), configured in your printer.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Settings
>
Fax
.
3
From the Fax Mode menu, select
Fax Server
, and then click
Save
.
4
Click
Fax Server Setup
.
5
In the To Format field, type
[#]@myfax.com
, where
[#]
is the fax number and
myfax.com
is the fax
provider domain.
Notes:
•
If necessary, configure the Reply Address, Subject, or Message fields.
•
To let the printer receive fax messages, enable the device
‑
based fax receive setting. Make sure that
you have a device
‑
based fax configured.
6
Click
Save
.
7
Click
Fax Server E
‑
mail Settings
, and then do either of the following:
•
Enable
Use E
‑
mail SMTP Server
.
Note:
If the E
‑
mail SMTP settings are not configured, then see
.
•
Configure the SMTP settings. For more information, contact your e
‑
mail service provider.
8
Apply the changes.
Set up, install, and configure
31
