Lexmark XM3142 User Manual Download Page 248

Page: 248 / 273

Scanner does not close

Action

Yes

Remove obstructions that keep the scanner cover open.

Did the scanner cover close correctly?

The problem is
solved.

Contact

customer

support

Scanning takes too long or freezes the computer

Action

Yes

Close all applications that are interfering with the scan.

Does scanning take too long or freeze the computer?

Contact

customer

support

The problem is
solved.

Scanner does not respond

Action

Yes

Step 1

Check if the power cord is connected properly to the printer
and the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre

or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet
that is near the product and easily accessible.

Copy or scan the document.

Is the scanner responding?

The problem is
solved.

Go to step 2.

Step 2

Check if the printer is turned on.

Resolve any error messages that appear on the display.

Copy or scan the document.

Is the scanner responding?

The problem is
solved.

Go to step 3.

Step 3

Turn off the printer, wait for about 10 seconds, and then turn the
printer on.

Copy or scan the document.

Is the scanner responding?

The problem is
solved.

Contact

customer

support

Troubleshoot a problem

248

Summary of Contents for XM3142


















































































































































































































































































Search results

Summary of Contents for XM3142

Reviews:

Related manuals for XM3142

Brands by name

Popular brands

Lexmark XM3142, User Manual

Search results

Summary of Contents for XM3142

Reviews:

Related manuals for XM3142

Brands by name

Popular brands