Lexmark XM1135, Service Manual

Page: 38 / 510

•
Make sure the adhesive backing does not reach to the edge of the sheet. Zone coating of the adhesive
should be at least 1 mm (0.04 inches) away from edges. Adhesive material contaminates the printer and
could void the warranty.
•
If zone coating of the adhesive is not possible, then remove a 2
‑
mm (0.06
‑
inches) strip on the leading and
driver edge, and use a non
‑
oozing adhesive.
•
Portrait orientation is recommended, especially when printing bar codes.
Tips on using letterhead
•
Use letterhead designed specifically for laser printers.
•
Print samples on the letterhead being considered for use before buying large quantities.
•
Before loading letterhead, flex, fan, and straighten the stack to prevent sheets from sticking together.
•
Page orientation is important when printing on letterhead.
Tips on using transparencies
•
Print a test page on the transparencies being considered for use before buying large quantities.
•
Feed transparencies from the standard tray, or the multipurpose feeder.
•
Use transparencies designed specifically for laser printers. Transparencies must be able to withstand
temperatures up to 185°C (365°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
Note: If the transparency weight is set to Heavy and the transparency texture is set to Rough in the Paper
menu, then transparencies can be printed at a temperature up to 195°C (383°F).
•
Avoid getting fingerprints on the transparencies to prevent print quality problems.
•
Before loading transparencies, flex, fan, and straighten the stack to prevent sheets from sticking together.
Supported paper sizes, types, and weights
Supported paper sizes
Paper size and
dimension Standard
250
‑
sheet tray
Optional 250
‑
or 550
‑
sheet
tray
Multipurpose
feeder ADF Scanner
glass Duplex
mode
Business card X X X X X
3 x 5 in. X X X X
4 x 6 in. X X X X
A4
210 x 297 mm (8.27 x 11.7
in.)
A5
148 x 210 mm (5.83 x
8.27 in.)
X
*
Universal is supported in duplex mode only if the width is at least 210 mm (8.27 in.) and the length is at least 279.4
mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.
7015
General information
38