Lexmark XC9225 User Manual Download Page 99

Page: 99 / 338

Menu item

Description

Log File Preﬁx

Specify the preﬁx for the log ﬁles.

Note:

The current host name deﬁned in the TCP/IP menu is used as the

default log ﬁle preﬁx.

Note:

An asterisk (*) next to a value indicates the factory default setting.

XPS

Menu item

Description

Print Error Pages

Off*

Print a test page that contains information on errors.

Minimum Line Width

1–30 (2*)

Set the minimum stroke width of any job printed in 1200 dpi.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PDF

Menu item

Description

Scale To Fit

Off*

Scale the page content to ﬁt the selected paper size.

Annotations

Do Not Print*

Specify whether to print annotations in the PDF.

Print PDF Error

Off

On*

Enable the printing of PDF error.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PostScript

Menu item

Description

Print PS Error

Off*

Print a page that describes the PostScript® error.

Note:

When an error occurs, processing of the job stops, the printer

prints an error message, and the rest of the print job is ﬂushed.

Minimum Line Width

1–30 (2*)

Set the minimum stroke width.

Note:

Jobs printed in 1200 dpi use the value directly.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands