Lexmark XC9225 User Manual Download Page 28

Page: 28 / 338

Setting up and using the accessibility features

Enabling Magniﬁcation mode

From the control panel, press and hold the

key until you hear a voice message.

Select

Magniﬁcation mode

Select

For more information on navigating a magniﬁed screen, see

“Navigating the screen using gestures” on

page 29

Activating Voice Guidance

From the control panel

Press and hold the

key until you hear a voice message.

Select

From the keyboard

Press and hold the

key until you hear a voice message.

Press

Tab

to navigate the focus cursor to the OK button, and then press

Enter

Notes:

•

Voice Guidance is also activated when you insert headphones into the headphone jack.

•

To adjust the volume, use the volume buttons at the bottom part of the control panel.

Adjusting the Voice Guidance speech rate

From the home screen, select

Settings

Device

Accessibility

Speech Rate

Select the speech rate.

Adjusting the default internal speaker volume

From the control panel, navigate to:

Settings

Device

Preferences

Audio Feedback

Adjust the volume.

Notes:

•

If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.

Setting up and using the accessibility features

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands