Lexmark XC9225 User Manual Download Page 24

Page: 24 / 338

Setting up Scan Center

From the home screen, touch

Scan Center

Select and create a destination, and then conﬁgure the settings.

Notes:

•

When creating a network destination, make sure to validate and adjust the settings until no errors
occur.

•

Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.

Apply the changes.

Using Customer Support

From the home screen, touch

Customer Support

Print or e

‑

mail the information.

Note:

For information on conﬁguring the application settings, see the

Customer Support Administrator’s

Guide.

Setting up Device Quotas

You may need administrative rights to access the application.

Open a Web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Click

Apps

Device Quotas

Conﬁgure

From the User Accounts section, add or edit a user, and then set the user quota.

Apply the changes.

Note:

For information on how to conﬁgure the application and its security settings, see the

Device

Quotas Administrator’s Guide

Using Display Customization

Before using the application, make sure to do the following:

•

From the Embedded Web Server, click

Apps

Display Customization

Conﬁgure

•

Enable and conﬁgure the screen saver, slideshow, and wallpaper settings.

Managing screen saver and slide show images

From the Screen Saver and Slideshow Images section, add, edit, or delete an image.

Setting up and using the home screen applications

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands