Lexmark XC6152, User Manual

Page: 260 / 301

Scanner does not respond
Action Yes No
Step 1
a
Check if the power cord is connected properly to the printer
and the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire
or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet
that is near the product and easily accessible.
b
Copy or scan the document.
Is the scanner responding?
The problem is
solved. Go to step 2.
Step 2
a
Check if the printer is turned on.
b
Resolve any error messages that appear on the display.
c
Copy or scan the document.
Is the scanner responding?
The problem is
solved. Go to step 3.
Step 3
a
Turn off the printer, wait for about 10 seconds, and then turn the
printer on.
b
Copy or scan the document.
Is the scanner responding?
The problem is
solved. Contact customer
support .
Adjusting scanner registration
1
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Scanner
Configuration > Scanner Manual Registration .
2
In the Print Quick Test menu, touch Start .
3
Place the Print Quick Test page on the scanner glass, and then touch Flatbed Registration .
4
In the Copy Quick Test menu, touch Start .
5
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Left Margin and
Top Margin.
6
Repeat step 4 and step 5 until the margins of the Copy Quick Test page closely match the original document.
Adjusting ADF registration
1
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Scanner
Configuration > Scanner Manual Registration .
2
In the Print Quick Test menu, touch Start .
Troubleshooting 260